AFC3 PROFESSIONAL THREE RECEIVER RACK MOUNT

DESIGNED ESPECIALLY FOR THE PROFESSIONAL MONITORING OR EAS MONITORING REQUIREMENTS, THE AFC3 PROVIDES THREE RECEIVERS IN A CONVENIENT 1 3/4 INCH RACK MOUNT PACKAGE.

AVAILABLE RECEIVERS INCLUDE WEATHER, FM, AM, AND PUBLIC SERVICE BAND (148 TO 175 MHz). THESE RECEIVERS ARE DESIGNED TO MEET PROFESSIONAL MONITORING AND EAS EQUIPMENT INPUT REQUIREMENTS


GENERAL SPECIFICATIONS:

A standard 1 3/4 inch high 19 inch rack mount chassis designed to contain up to three Dayton Industrial receivers.

The AFC3 contains a front panel AUDIO SELECTOR switch, mounted small speaker and HDST (headset) outputs controlled by the VOL control.

Also mounted on the front panel are LED indicators that indicate the presence of the CARRIER and MODULATION activity for each receiver.

An ALERT LED indicator and TEST/RESET switch is mounted on the front panel for those receivers that use tone detectors for sensing the ALERT mode including the weather and public service monitors.

The AFC3 rear panel contains the outputs for the chosen receivers. These outputs are the audio LINE (RCA unbalanced and DIN Balanced) outputs, SPKR (RCA) and RELAY (DIN) outputs. The power input (12VDC) is also located on the rear panel. Power is derived from a wall mounted converter.

 DAYTON INDUSTRIAL RECEIVERS:

We manufacture several receivers that are designed to be components of the AFC3. These include the AF220 FM receiver, the AF310 AM receiver, the AF610 Weather (NOAA) receiver, and the AF810 Public Service Monitor.
In general, these receivers are phase lock loop (P.L.L.) controlled with the frequency of operation selected using internal DIP or BCD switches.
A continuous receiver LINE audio output is provided.
A second output (SPKR) is also provided. In the Weather and Public Service monitors, the SPKR output audio is controlled automatically by tone detector circuits that monitor the receiver audio for the presence of specified alert tones. There is also a TEST and RESET switch for activating the SPKR audio and ALERT light manually.

All receivers have input power of 12 VDC and have automotive type regulators.
AFC3 CONTROLS/FEATURES

Three Receiver combined unit in a 1 3/4 inch rack,

Front panel carrier and modulation LED indicators,

Internal monitor speaker,

Front panel HDST and VOL control,

ALERT LED’s and TEST/RESET switch,

 

10 volt automotive type internal regulator allows vehicle or battery standby operation,

Designed for professional use.

POWER: 115VAC to 12Vdc Power Converter (provided)

SIZE: 19” W x 9” D x 1 3/4” H

WEIGHT: 5.5 lbs. (w/o converter)

      DAYTON INDUSTRIAL CORPORATION        
2237 Industrial Blvd., Sarasota, Florida 34234
Tel: (941) 351-4454 Fax: (941) 351-6081
E-Mail: SCARadio@aol.com